floor system

CMCE 1115 Project # 1 – Floor Systems
Spring 2020
Floor Framing Plan
Dimensions & Loading Table
Case
Number
“A”
(feet)
“B”
(feet)
“C”
(feet)
Column I
(kips)
Column II
(kips)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16
16
16
20
20
20
20
24
24
24
24
28
28
28
18
18
18
18
24
24
24
24
28
28
28
28
32
32
32
2
2
2
2
3
3
3
3
4
4
4
4
3
3
3
1.00
1.25
1.50
2.00
2.25
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
5.00
1.00
1.25
1.50
2.00
2.25
2.75
3.00
3.25
3.50
3.75
4.00
4.25
4.50
4.75
5.00
Uniformly Distributed Load
Live Load
Dead Load
(k/ft²)
(k/ft²)
1.00
1.00
1.25
1.25
1.50
1.50
1.75
1.75
2.00
2.00
2.25
2.25
2.50
2.50
2.75
0.50
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.00
1.25
1.25
1.25
CMCE 1115 Project # 1 – Floor Systems
Spring 2020
Due Date: March 25th, 2020
Purpose:
You are an engineer at a local engineering firm. Your supervisor asked you to analyze three beams
shown on the “Floor Framing Plan” for a building in Brooklyn. Your assignment is to solve for the
reactions at the supports for each beam included in your case.
Note: Neglect the weight of the beam in your analysis.
For your individual case number do the following for each of the 3 loaded beams:
a. Simply supported – Beam F1
b. Overhanging – Beam F2
c. Fixed ended – Beam F3
Requirements:
Each student is to complete and submit their report in the following order:
1) Cover page: to be typed and must include:
a)
b)
c)
d)
e)
f)
your name
project name
project number
case number
date due
date submitted
2) Instructions:
a) Floor Framing Plan
b) Dimensions & Loading Table – highlight your case
3) Calculations: to be completed on one side of engineering paper, one beam case per sheet, must
be neat and must include:
a)
b)
c)
d)
Loading Diagram drawn to an approximate scale for each analyzed beam
A Free Body Diagram (F.B.D.) for each analyzed beam
Solve for the reactions at the supports for each beam included in your case
Include all units!